Digital signal level meter SX2086

ProductID:DW-S011

Introduction of the Signal Level Meter:

The product, which newly researched and developed, is the integrative high-tech measuring instrument for the transformation of CATV .The main function is to measure QAM digital signal and analogue signal. The measurable item includes:Level measurement, tilt measurement, scan measurement, spectrum measurement, carrier noise ratio measurement, and rail voltage measurement. Make the corresponding choice according to the different occasion. The inside process chip adopts the extensive integrated microprocessor which is special to the most advanced tester in the world at present. It has many characteristics such as: the complete function, the fast processing speed, the low static power consumption, small and the high dependability. The peripheral circuit uses its special integrated package design according to corresponding function. The appearance adopts the human mechanics principle, it can be held firmly by single-hand and operated.

Tuning range:from 5M~862MHz
Tuning mode:by channels or by frequency
Level measurement
Analogue channels Measurement
IF bandwidth:280kHz+50kHz
Input impedance:75ohm
Measuring range:from 25 to 120 dBuv
Accuracy:+2dB (from 0 to 400C)
Digital channels Measurement
MER (modulation error ratio) measurement range:19~35dB for 64 QAM
Accuracy:+2dB
BER (bit error rate) measured before RS decoding measurement range:10E-2 to 10E-8
Symbol rate:1MS/S-7MS/S
Modulations type:16/32/64/128/256QAM DVB-C/ITU-TJ.83-AnnexA
Bandwidth:8MHz
Frequency tuner:100 KHz
Measuring range:from 40 to 120 dBuv
Accuracy :+3dB (from 0 to 400C)